Minn Kota OBN Terrova 80 Solix 10

SOLIX 10 CHIRP MEGA SI+ G3
SOLIX 10 G3 with Dual Core processor, a detailed 10.1″ 1500 Nits touch display and leading sonar technology such as MEGA Imaging+ and Dual Spectrum CHIRP Sonar.

Equipped with Cross Touch, Navionics chartplotter, Wi-Fi, Bluetooth, Ethernet network, NMEA 2000 and AutoChart Live to create your own charts in real time with depth, bottom hardness and vegetation.

Dual Core Processor
The SOLIX G3 Series' updated processor makes the device faster and more responsive than ever to maximize your time spent fishing.

Mega Imaging+ with increased range
Expand your views even more. MEGA Imaging+ on SOLIX G3 has a 25% longer range compared to previous generation SOLIX. 150 meters side to side and 75 meters at depth while delivering crystal clear images with even higher resolution. For MEGA+ devices, the 455 kHz band offers a range of 244 m side-to-side and 122 m at depth.

Dual Spectrum CHIRP
Also known as High Wide (HW) is the latest development in advanced 2D sonar. The new broadband elements in Dual Spectrum transducers have a very low Q value and deliver detailed 2D images with incredible separation. Combined with new algorithms and refined technology, the results are outstanding.

User-friendly Cross Touch Interface
The user-friendly interface makes SOLIX easy to use. Switch between different functions without losing sight of the map and sonar. Pinch and Zoom with ease and take advantage of the 20% higher resolution offered by MEGA Imaging+. Point and hold, drag and drop, pinch and swipe to perform the commands you want. Together with the physical keypad, it combines the best of both worlds.

AutoChart Live
Create your own real-time charts with depth, bottom hardness and vegetation with AutoChart Live. The device has a built-in recording memory of 8 hours. If you want to expand this, AutoChart ZeroLine card is available as an accessory below. The card offers well over 2000 hours of mapping.

NMEA 2000
Connect SOLIX to other devices on board via NMEA 2000 and experience the ability to control Fusion marine stereo and autopilot directly from the device. Or why not display AIS information and engine data on the high-resolution bright screen.

Ethernet
SOLIX is network compatible and can easily be connected to another SOLIX unit to share GPS position, chart and sonar data, sensors, waypoints and more. In addition to sharing the above information, you can also connect various accessories via the network connection such as the Humminbird CHIRP Radar and the i-Pilot Link compatible trolling motor from Minn Kota.

Bluetooth & Wi-Fi
Thanks to Bluetooth, it is possible to control the sonar directly from an RC2 wireless remote control, connect your cell phone for software updates and receive notifications of messages and calls directly on the screen, and control the Minn Kota Talon and Raptor and Cannon Optimum directly from the sonar. Built-in Wi-Fi also enables a wide range of communication options, including support for Navionics Plotter Sync.

Navionics charts & Plotter Sync
The devices are prepared for Navionics cartography and support Navionics+ Small, Navionics+, Platinum+ and Navionics Update charts. With the Plotter Sync feature, you can easily connect your smartphone to SOLIX's built-in Wi-Fi and share planned routes and waypoints with one click.

Dual card slots
The dual SD card slots provide features such as using dual charts with different areas, saving screenshots on a blank separate SD card, using an AutoChart ZeroLine card while using Navionics Cartography and several other possibilities.

Terrova 80 WR 60″
Minn Kota Terrova, a bow-mounted trolling motor packed with features to make your fishing easier.

Advanced GPS: The Terrova uses Minn Kota's new GPS guidance to keep you in place. Set Spot-Locks, save routes, control speed and steering, and more right from the updated remote control. Advanced GPS replaces both i-Pilot and i-Pilot Link to give you the best of both worlds.

Take advantage of the One-Boat Network: The engine supports One-Boat Network connectivity as standard and comes with everything you need to connect to network-compatible Humminbird echo sounders.

Spot-Lock anchoring with Jog: Spot-Lock keeps you in place with extreme accuracy and allows you to GPS anchor anywhere. With the included Heading Sensor, you can use Jog to move your Spot-Lock location 1.5 meters in the desired direction at the touch of a button.

The new Drift Mode feature compensates for currents and wind by automatically adjusting speed and direction to keep the boat in a proper drift towards the depth contour or shoreline.

The motor should always be mounted with Minn Kotas 60A fuse and a compatible quick release is recommended. We also recommend that the MKR-28 (see accessories below) is fitted. For power supply and other detailed information see product description.

Minn Kota MKA-21 Quick Mount
Robust composite quick mount for front mounted trolling motors with a rig length up to 60″. The bracket makes it easy to mount on and off the motor. The discreet puck solution keeps the deck clean when the motor is not in place. Stainless steel locking handles can be secured with padlocks.

Humminbird AutoChart Zero Line card
Humminbird AutoChart ZeroLine Micro SD card with SD adapter. Contains base map of European lakes. The base map contains only contour lines; no depths or other information that a standard chart contains. Enables longer logging than the 8h offered by compatible Humminbird devices without a chart. For AutoChart Live and AutoChart PC.